Department of Mechanical Engineering
Scientific Activities
This section provides an overview of the principal scientific and scholarly activities of the Department of Mechanical Engineering.
Here you will find information on:
- ongoing research projects and long-term research objectives,
- completed research projects funded through national and Ministry of Defence programmes,
- specific university research projects supported by the Ministry of Education, Youth and Sports,
- student scientific and scholarly activities (STČ) and award-winning student projects,
- doctoral dissertations and habilitation theses completed at the Department,
- publication activities, including articles in scientific journals, conference papers, and other research outputs.
Ongoing and completed projects
Ongoing Projects and Long-Term Development Programmes
The Department of Mechanical Engineering is currently involved in research projects and long-term development programmes funded by the Ministry of Defence of the Czech Republic. The overview below provides key information on ongoing activities, including their funding bodies, implementation periods, and principal investigators.
Project / Programme | Funding body | Implementation period | Principal investigator |
Military Autonomous and Robotic Assets (VAROPS) | Ministry of Defence of the Czech Republic – DZRO | 2021–2027 | Lt Col Roman Vítek, Ph.D. |
Conduct of Airspace Operations (AIROPS) | Ministry of Defence of the Czech Republic – DZRO | 2021–2027 | Col GS Assoc. Prof. Josef Bajer, Ph.D. |
Completed Research Projects
The Department of Mechanical Engineering has a long-standing involvement in research projects funded by the Technology Agency of the Czech Republic (TA CR), the Czech Science Foundation (GA CR), and the Ministry of Defence of the Czech Republic. The overview below presents selected completed projects carried out at the Department, including their funding bodies, implementation periods, and principal investigators.
Project | Funding body / Programme | Implementation period | Principal investigator |
New Generation Gears Pumps | Technology Agency of the Czech Republic (TA CR) – ALFA Programme | 2014–2017 | Prof. Jaromír Kadlec, CSc. |
Research on Recoil Simulation in Small Arms | Technology Agency of the Czech Republic (TA CR) – DELTA Programme | 2015–2017 | Prof. Vladimír Horák, CSc. |
Use of Nanofibres for Application of Bioactive Substances Using Dental Floss | Technology Agency of the Czech Republic (TA CR) – ÉTA/CEP Project | 2020–2023 | Col GS Prof. Zdeněk Pokorný, Ph.D., FEng. |
Development of Technologies in Weapon Design, Ammunition, Armament Instrumentation, Materials Engineering and Military Infrastructure (VÝZBROJ) | Ministry of Defence of the Czech Republic – DZRO | 2016–2020 | Lt Col Roman Vítek, Ph.D. |
Specific university research projects
Specific university research projects constitute an important part of the scientific activities of the Department of Mechanical Engineering. They are funded by the Ministry of Education, Youth and Sports of the Czech Republic (MEYS) and focus on the advancement of materials engineering, advanced manufacturing technologies, additive manufacturing, numerical simulations, ballistic protection, and other areas related to specialisedchnology.
Ongoing Specific University Research Projects
Project | Funding body / Programme | Implementation period | Principal investigator |
Innovative Technologies in Specialised Technology: Advanced Thermochemical Treatment, Advanced Materials for Ballistic Protection and Emerging Additive Manufacturing Technologies | MEYS – Specific University Research | 2026–2029 | Martin Klimeš |
Advanced Numerical Simulations for Military Applications | MEYS – Specific University Research | 2025–2027 | Bui Thanh Phan |
Completed Specific University Research Projects
Project | Funding body / Programme | Implementation period | Principal investigator |
New Perspectives in Additive Manufacturing Technologies and Materials Engineering with a Focus on Military Applications | MEYS – Specific University Research | 2024–2026 | Tomáš Dražan |
New Perspectives in Materials Solutions for Ballistic Protection, Additive Manufacturing Technologies and Process Engineering in Specialised Technology | MEYS – Specific University Research | 2023–2025 | Jindřich Viliš |
Selected Issues in Surface and Additive Manufacturing Technologies and Process Engineering | MEYS – Specific University Research | 2020–2022 | David Dobrocký |
Academic and professional cooperation
The Department of Mechanical Engineering maintains long-standing cooperation with universities, research institutions, industrial partners, and organisations in the defence sector. This cooperation encompasses joint scientific and professional activities, experimental work, publication activities, and education.
Selected Partners:
- Czech Republic: Czech Academy of Sciences, Brno University of Technology, Czech Technical University in Prague, University of Pardubice, VSB – Technical University of Ostrava, Jan Evangelista Purkyně University in Ústí nad Labem
- International Partners: Technical University of Trenčín, Slovak University of Technology in Bratislava, Rzeszów University of Technology
The Department’s academic staff also serve on expert committees, scientific boards, and doctoral programme boards at universities and research institutions.
Student scientific activities
Student scientific activities form an integral part of the scientific work of the Department of Mechanical Engineering. As part of the competition, students present the results of their own research, closely linked to the Department’s ongoing projects. The principal areas addressed include:
- characterisation and evaluation of the properties of materials used in engineering and military applications,
- design, manufacture, and testing of components produced using additive manufacturing (3D printing),
- experimental assessment of the ballistic resistance of materials and composite protection systems,
- analysis of the effects of heat treatment and thermochemical treatment on the properties of engineering materials,
- numerical simulation of mechanical, thermal, and dynamic processes and comparison of simulation results with experimental data,
- mechanical testing of materials and structures, including failure and service-life analysis,
- design and validation of laboratory test fixtures, measurement methods, and experimental equipment,
- investigation of design, manufacturing, and materials engineering problems related to military technology.
Listed below are students of the Department of Mechanical Engineering (K-216) who received awards in Section 1 – Mechanical Engineering and Materials, Manufacturing Technologies of the Student Scientific Activities Competition organised by the Faculty of Military Technology.
2026
| Place | Author | Title | Supervisor |
|---|---|---|---|
| 1st | CPL Jindřich Kubíček | Design of a Reconnaissance UGV for Selected Units of the Czech Armed Forces | Jiří Procházka |
| 2nd | Vojtěch Sysel | Design of an Additively Manufactured Interlayer with an Energy-Dissipating Architecture for Enhanced Ballistic Resistance of Composite Materials | Jindřich Viliš |
| 3rd | CPL Ondřej Jízdný | Detailed Design of a Measurement System for JetSurf Waterjet Testing | Lenka Dobšáková |
2025
| Place | Author | Title | Supervisor |
|---|---|---|---|
| 1st | SFC Radka Ličková | Numerical Simulation of the Cooling Process in the T3-930-51 Engine | Lenka Dobšáková |
| 2nd | SGT Radek Šimek | Modification of FPV Drones for Special Operations | Tomáš Dražan |
| 3rd | CPL Ondřej Brabec | Experimental Measurement of the Cooling Process of a Tatra 815 Engine Model | Lenka Dobšáková |
2024
| Place | Author | Title | Supervisor |
|---|---|---|---|
| 1st | SGT Ondřej Linka | Mechanical Properties of Ballistic Materials after Exposure to Extreme Environments | Zbyněk Studený |
| 3rd | PFC Matyáš Filip | Theoretical Analysis of the Ram-Air Turbine of a Racing JetSurf | Lenka Dobšáková |
2023
| Place | Author | Title | Supervisor |
|---|---|---|---|
| 1st | PFC Markéta Váhalová | Analysis of the Properties of 3D-Printed Parts Joined by Adhesive Bonding | Tomáš Dražan |
| 2nd | CPL Vít Chadima | Evaluation of Threaded Connections in 3D-Printed Parts | Zdeněk Joska |
| 3rd | CPL Radek Šimek | Design of an FDM-Printed Mould for Silicone Casting | Zdeněk Joska |
2022
| Place | Author | Title | Supervisor |
|---|---|---|---|
| 1st | SSG Jakub Horníček | Possibilities of Using 3D Printing for the Production of Components and Parts Used in the Czech Armed Forces | Zdeněk Joska |
| 2nd | SGT David Grasev | Composite Materials for Hard Ballistic Protection | Zbyněk Studený |
| 3rd | Bc. Bui Thanh Phan | Study of Diffusion in Vacuum Drying of Propellants | Vladimír Horák |
Doctoral dissertations, habilitation and professorial appointments
Doctoral dissertations in progress
| Year Commenced | Doctoral Student | Dissertation Title | Supervisor |
|---|---|---|---|
| 2025 | Martin Klimeš | Application of Advanced Thermochemical Treatment Technologies in Practice | David Dobrocký |
| 2023 | Tomáš Dražan | Analysis of the Effects of Additive Manufacturing Process Parameters on the Properties of Military Equipment Components | David Dobrocký |
| 2023 | Bui Thanh Phan | Methods for Improving the Ballistic Performance of Composite Armour | Vladimír Horák |
| 2023 | Ngoc Tung Nguyen | Research on the Characteristics of 3D-Printed Parts Using Polymer-Based Composite Materials | Zbyněk Studený |
Completed doctoral dissertations
| Year of Defence | Doctoral Graduate | Dissertation Title | Supervisor |
|---|---|---|---|
| 2025 | Jindřich Viliš | Utilization of composite materials for ballistic protection | Zdeněk Pokorný |
| 2022 | Jiří Procházka | The use of duplex coatings for parts of special technology | Josef Sedlák |
| 2018 | Ondřej Klanica | Influence of substrate pre-treatment and coating post-treatment on surface texture | Emil Svoboda |
| 2015 | David Dobrocký | Verification of selected mechanical properties of nitrided layers of structural steels in a wide temperature range | Milan Chalupa |
| 2012 | Zdeněk Joska | Duplex coatings on metallic substrates for use in special technology | Jaromír Kadlec |
| 2011 | Zdeněk Pokorný | Plasma nitriding of cavities | Vojtěch Hrubý |
| 2009 | Zbyněk Studený | Utilization of biocompatible materials in military technology | Jaromír Kadlec |
Habilitation theses
| Year of Habilitation | Academic Staff Member | Habilitation Thesis Title |
|---|---|---|
| 2022 | David Dobrocký | Changes in Surface Dimensions and Texture Following Thermochemical Treatment |
| 2018 | Zbyněk Studený | Effect of Plasma Nitriding on the Fatigue Characteristics of Steels |
| 2017 | Zdeněk Pokorný | Methods for Modifying the Fundamental Characteristics of Layers during Thermochemical Treatment of Steels |
Professorial appointment proceedings
| Year of Appointment | Academic Staff Member | Field |
|---|---|---|
| 2022 | Zdeněk Pokorný | Materials Science and Engineering |
Publications
Lt Col Assoc. Prof. Zbyněk Studený, Ph.D.
Head of the Department of Mechanical Engineering
| Year | Publication output | Category |
|---|---|---|
| 2026 | NGUYEN, H. T., QUOC-PHU, M., PROCHÁZKA, J., STUDENÝ, Z., DOBROCKÝ, D., MĚSÍČEK, J., PETRŮ, J. Development of in-house PC/ABS blends and optimization of printing parameters for material extrusion method. Materials & Design, 260, 115290 (IF 8.2). | Jimp |
| 2025 | STUDENÝ, Z., KUBÍČEK, A., SOCHORA, V., POKORNÝ, Z., DEBNÁROVÁ, S., SOUČEK, P. W-Based Thin Film Metallic Glasses Doped with Ni, Zr, and B for Industrial Applications. Advanced Engineering Materials, 27(17), 2500458 (IF 3.6). | Jimp |
| 2025 | NGUYEN, H. T., PROCHÁZKA, J., STUDENÝ, Z., DOBROCKÝ, D. Effects of Extrusion Parameters on Filament Quality and Mechanical Properties of 3D Printed PC/ABS Components. MM Science Journal, 2025(2), 8453–8458 (IF 0.6). | Jimp |
| 2025 | DOBROCKÝ, D., STUDENÝ, Z., PROCHÁZKA, J., POKORNÝ, Z., VILIŠ, J. Use of Integral Characteristics in the Evaluation of Surface Texture of Components after Plasma Nitriding. In: Materials and Technologies for Defence and Security. | DSc |
| 2024 | VARHANIK, M., SEDLÁK, J., STUDENÝ, Z., JANIGOVÁ, P., CHROMJAKOVÁ, F. Tribological Properties of 3D Printed Materials in Total Knee Endoprosthesis. Manufacturing Technology, 24(2), 294–306 (IF 1.4). | Jimp |
Prof. Vladimír Horák, CSc.
| Year | Publication Output | Category |
|---|---|---|
| 2026 | PHAN, Bui Thanh, KULISH, Vladimir, HORÁK, Vladimír. An analytical model for ballistic performance prediction of elastoplastic materials with strain hardening. Archives of Mechanics, 78(1), 3–31 (IF 0.6). | Jimp |
| 2025 | KULISH, Vladimir, PHAN, Bui Thanh, HORÁK, Vladimír. A non-field analytical solution of the Luikov equations for simultaneous heat and mass transfer. Results in Engineering, 25, 104534 (IF 9.4). | Jimp |
| 2025 | KULISH, Vladimir, HORÁK, Vladimír, PHAN, Bui Thanh. Latent Heat Accumulators: An Equation for the Mass Change of Phase. Applied Thermal Engineering, 262, 125263 (IF 7.5). | Jimp |
| 2025 | PHAN, Bui Thanh, VÍTEK, Roman, VILIŠ, Jindřich, HORÁK, Vladimír. An Analytical Model for Ballistic Performance of Fiber-Reinforced Plastic Laminates. Applied Composite Materials, 32(4), 1639–1657 (IF 3.9). | Jimp |
| 2025 | KULISH, Vladimir, PHAN, Bui Thanh, HORÁK, Vladimír. Fractional Differ-Integral Approach to Unsteady Filtration in Bi-Structured Porous Media. Journal of Porous Media, 28(11), 29–39 (IF 2.2). | Jimp |
Prof. Zuzana Murčinková, Ph.D.
| Year | Publication Output | Category |
|---|---|---|
| 2025 | MURČINKOVÁ, Z., HOLÍČEK, R., BARON, P., ONUFER, M. Determination of Compressive Stress Limits for Tightened Plastic Components up to 3 mm in Bolted Joints Applicable in the Automotive Industry. Polymers (IF 5.8). | Jimp |
| 2024 | SABOL, D., MURČINKOVÁ, Z. Stress Wave Propagation and Decay Based on Micro-Scale Modelling in the Topology of Polymer Composite with Circular Particles. Polymers (IF 5.8). | Jimp |
| 2022 | MURČINKOVÁ, Z., POSTAWA, P., WINCZEK, J. Parameters Influence on the Dynamic Properties of Polymer-Matrix Composites Reinforced by Fibres, Particles, and Hybrids. Polymers (IF 5.8). | Jimp |
| 2021 | MURČINKOVÁ, Z., ADAMČÍK, P., ŽIVČÁK, J. Re-design of Machine Tool Joint Components Based on Polymer Fillings for High-Speed Performance. Materials (IF 3.7). | Jimp |
| 2021 | MURČINKOVÁ, Z., KOSTURÁK, M., FERENC, J. Testing of Proposed Design of Stove-Powered Thermoelectric Generator Using Natural and Forced Air Cooling. Advances in Mechanical Engineering (IF 2.1). | Jimp |
Col GS Prof. Zdeněk Pokorný, Ph.D., FEng.
| Year | Publication Output | Category |
|---|---|---|
| 2026 | VILIŠ, Jindřich, ŠUSTR, Michal, TUPAJ, Mirosław, TRYTEK, Andrzej, KUSMIČ, David, POKORNÝ, Zdeněk, ZOUHAR, Jan, DRÁBEK, Jan. Impact Resistance of ER68 Thermoset and TH110 Thermoplastic Para-Aramid Composite Panels. Defence Science Journal, 76(4), 605–613 (IF 0.8). | Jimp |
| 2025 | STUDENÝ, Zbyněk, KUBÍČEK, Antonín, SOCHORA, Vjaceslav, POKORNÝ, Zdeněk, DEBNÁROVÁ, Stanislava, SOUČEK, Pavel. W-Based Thin Film Metallic Glasses Doped with Ni, Zr, and B for Industrial Applications. Advanced Engineering Materials, 27(17), 2500458 (IF 3.6). | Jimp |
| 2025 | VILIŠ, Jindřich, KOSIUCZENKO, Krzysztof, NOWAKOWSKI, Marek, TUPAJ, Mirosław, TRYTEK, Andrzej, ZOUHAR, Jan, VÍTEK, Roman, GREGOR, Lukáš, POKORNÝ, Zdeněk. Comprehensive Evaluation of Layered Composite Protection Performance for Light Armored Vehicles. Journal of Materials Engineering and Performance, 34(23), 28643–28660 (IF 2.6). | Jimp |
| 2022 | VILIŠ, Jindřich, POKORNÝ, Zdeněk, ZOUHAR, Jan, JOPEK, Miroslav. Ballistic Resistance of Composite Materials Tested by Taylor Anvil Test. Manufacturing Technology, 22(5), 610–616 (IF 0.9). | Jimp |
| 2022 | VILIŠ, Jindřich, POKORNÝ, Zdeněk, ZOUHAR, Jan, JOPEK, Miroslav. Ballistic Resistance of Composite Materials Tested by Taylor Anvil Test. Manufacturing Technology, 22(5), 610–616 (IF 0.9). | Jimp |
Maj Assoc. Prof. David Dobrocký, Ph.D.
| Year | Publication Output | Category |
|---|---|---|
| 2026 | NGUYEN, Hoang Tung, QUOC-PHU, Ma, PROCHÁZKA, Jiří, STUDENÝ, Zbyněk, DOBROCKÝ, David, MĚSÍČEK, Jakub, PETRŮ, Jana. Development of in-house PC/ABS blends and optimization of printing parameters for material extrusion method. Materials & Design, 260, 115290 (IF 8.2). | Jimp |
| 2026 | KLIMEŠ, Martin, VILIŠ, Jindřich, DOBROCKÝ, David, PROCHÁZKA, Jiří. Process robustness in reduced-time vacuum carburizing of automotive gear steels. International Journal of Advanced Manufacturing Technology (IF 3.7). | Jimp |
| 2026 | VILIŠ, Jindřich, ŘEHOŘEK, Lukáš, DOUBRAVA, Marek, PROCHÁZKA, Jiří, KLIMEŠ, Martin, DOBROCKÝ, David, CHLUP, Zdeněk, JUDAS, Jakub. Structure-Property Relationships in Cold-Sprayed Ti-6Al-4V and Ti-6Al-4V/SiC Multilayer Deposits: Influence of Ceramic Reinforcement. Journal of Thermal Spray Technology (IF 3.4). | Jimp |
| 2025 | DRAŽAN, Tomáš, JOSKA, Zdeněk, KLUCZYNSKI, Janusz, PLATEK, Pawel, DOBROCKÝ, David, KRCHOVÁ, Michaela. Analysis of the Effect of Changing Printing Parameters on the Properties of Additively Manufactured Ultrafuse 316L Steel Samples. Archives of Civil and Mechanical Engineering, 25(4), 204 (IF 4.9). | Jimp |
| 2025 | VILIŠ, Jindřich, DOBROCKÝ, David, JOSKA, Zdeněk, PROCHÁZKA, Jiří, KLIMEŠ, Martin. The Effect of Changing the Temperature of the Vacuum Carburizing Process on the Layer Properties of Steels Used in the Automotive Industry. International Journal of Advanced Manufacturing Technology, 137(5–6), 2823–2833 (IF 3.7). | Jimp |
David Kusmič, Ph.D.
| Year | Publication Output | Category |
|---|---|---|
| 2026 | VILIŠ, Jindřich, ŠUSTR, Michal, TUPAJ, Mirosław, TRYTEK, Andrzej, KUSMIČ, David, POKORNÝ, Zdeněk, ZOUHAR, Jan, DRÁBEK, Jan. Impact Resistance of ER68 Thermoset and TH110 Thermoplastic Para-Aramid Composite Panels. Defence Science Journal, 76(4), 605–613 (IF 0.8). | Jimp |
| 2024 | VILIŠ, Jindřich, KUSMIČ, David, PHAN, Bui Thanh, ZOUHAR, Jan, POKORNÝ, Zdeněk, ŠAFL, Pavel, LINKA, Ondřej. Influence of Water Absorption on Tensile and Flexural Properties of Composite Samples. In: 33rd International Conference on Metallurgy and Materials (METAL 2024). | D |
| 2021 | KUSMIČ, David, ČECH, Ondřej, KLAKURKOVÁ, Lenka. Corrosion Resistance of Ferritic Stainless Steel X12Cr13 After Application of Low-Temperature and High-Temperature Plasma Nitriding. Manufacturing Technology, 21(1), 98–104. | Jsc |
| 2021 | KUSMIČ, David, KLAKURKOVÁ, Lenka, JULIŠ, Martin, GEJDOŠ, Pavel, VILIŠ, Jindřich, ČECH, Ondřej. The Corrosion Resistance of Hard Anodised EN AW 7075 T6 Alloy. In: ECS Transactions. | DSc |
| 2021 | KUSMIČ, David, KLAKURKOVÁ, Lenka. Evaluation of the Corrosion Resistance of EN AW 7075 Alloy after Anodic Oxidation. In: Progressive and Non-Conventional Surface Treatment Technologies. | D |
Capt Jiří Procházka, Ph.D.
| Year | Publication Output | Category |
|---|---|---|
| 2026 | NGUYEN, Hoang Tung, QUOC-PHU, Ma, PROCHÁZKA, Jiří, STUDENÝ, Zbyněk, DOBROCKÝ, David, MĚSÍČEK, Jakub, PETRŮ, Jana. Development of in-house PC/ABS blends and optimization of printing parameters for material extrusion method. Materials & Design, 260, 115290 (IF 8.2). | Jimp |
| 2026 | KLIMEŠ, Martin, VILIŠ, Jindřich, DOBROCKÝ, David, PROCHÁZKA, Jiří. Process Robustness in Reduced-Time Vacuum Carburizing of Automotive Gear Steels. International Journal of Advanced Manufacturing Technology (IF 3.7). | Jimp |
| 2026 | VILIŠ, Jindřich, ŘEHOŘEK, Lukáš, DOUBRAVA, Marek, PROCHÁZKA, Jiří, KLIMEŠ, Martin, DOBROCKÝ, David, CHLUP, Zdeněk, JUDAS, Jakub. Structure-Property Relationships in Cold-Sprayed Ti-6Al-4V and Ti-6Al-4V/SiC Multilayer Deposits: Influence of Ceramic Reinforcement. Journal of Thermal Spray Technology (IF 3.4). | Jimp |
| 2025 | VILIŠ, Jindřich, DOBROCKÝ, David, JOSKA, Zdeněk, PROCHÁZKA, Jiří, KLIMEŠ, Martin. The Effect of Changing the Temperature of the Vacuum Carburizing Process on the Layer Properties of Steels Used in the Automotive Industry. International Journal of Advanced Manufacturing Technology, 137(5–6), 2823–2833 (IF 3.7). | Jimp |
| 2022 | PROCHÁZKA, Jiří, VILIŠ, Jindřich, DOBROCKÝ, David, ŠPERKA, Petr. Modification of Diffusion Layers by Laser Shock Peening. Manufacturing Technology, 22(6), 724–732 (IF 0.9). | Jimp |
1st Lt Jindřich Viliš, Ph.D.
| Year | Publication Output | Category |
|---|---|---|
| 2026 | VILIŠ, Jindřich, ŘEHOŘEK, Lukáš, DOUBRAVA, Marek, PROCHÁZKA, Jiří, KLIMEŠ, Martin, DOBROCKÝ, David, CHLUP, Zdeněk, JUDAS, Jakub. Structure-Property Relationships in Cold-Sprayed Ti-6Al-4V and Ti-6Al-4V/SiC Multilayer Deposits: Influence of Ceramic Reinforcement. Journal of Thermal Spray Technology (IF 3.4). | Jimp |
| 2026 | KLIMEŠ, Martin, VILIŠ, Jindřich, DOBROCKÝ, David, PROCHÁZKA, Jiří. Process Robustness in Reduced-Time Vacuum Carburizing of Automotive Gear Steels. International Journal of Advanced Manufacturing Technology (IF 3.7). | Jimp |
| 2026 | VILIŠ, Jindřich, ŠUSTR, Michal, TUPAJ, Mirosław, TRYTEK, Andrzej, KUSMIČ, David, POKORNÝ, Zdeněk, ZOUHAR, Jan, DRÁBEK, Jan. Impact Resistance of ER68 Thermoset and TH110 Thermoplastic Para-Aramid Composite Panels. Defence Science Journal (IF 0.8). | Jimp |
| 2025 | VILIŠ, Jindřich, KOSIUCZENKO, Krzysztof, NOWAKOWSKI, Marek, TUPAJ, Mirosław, TRYTEK, Andrzej, ZOUHAR, Jan, VÍTEK, Roman, GREGOR, Lukáš, POKORNÝ, Zdeněk. Comprehensive Evaluation of Layered Composite Protection Performance for Light Armored Vehicles. Journal of Materials Engineering and Performance (IF 2.6). | Jimp |
| 2025 | PHAN, Bui Thanh, VÍTEK, Roman, VILIŠ, Jindřich, HORÁK, Vladimír. An Analytical Model for Ballistic Performance of Fiber-Reinforced Plastic Laminates. Applied Composite Materials (IF 3.9). | Jimp |